ZYTEQ TELLUS 5 USER MANUAL Pdf Download (2024)

Download this manual

Tellus 5 - Using JabblaIR with The Grid 2 and Grid 3 for Environmental Control

This guide provides information on setting up environmental control on the Tellus 5 for Grid

2 and Grid 3.

The environmental control unit contained in the Tellus 5 is called JabblaIR. JabblaIR works in

a similar way to other environmental control modules in that it allows you to record and

send infrared (IR) signals to control appliances such as televisions, DVD players and infra-red

remote controlled toys. Recorded infrared signals can then be transmitted from the Tellus 5.

On the Tellus 5 the IR receiver is located on the front of the device in the top right hand

corner. The IR receiver is where you will point the remote control that you are trying to

record.

IR Receiver

The Tellus 5 IR transmitter is located on the back of the device. Like all IR remote controls,

this transmitter must have a direct line of sight to the device (e.g. TV) that you want to

IR Transmitter

control.

When recording remote controls it is highly recommended to have brand new, good quality

batteries installed in the remote control.

__________________________________________________________

ZYTEQ pty ltd PO Box 190 South Melbourne Victoria 3205

Ph: 03 9696 2944 Fax: 03 9696 1755 Freecall: 1800 818 353

Email: info@zyteq.com.au Website: www.zyteq.com.au A.B.N. 81132 895 268